Cooling Tower

Product Finder Showing all 9 results
Select Product Type
Select Pump Category
Select Application
Select Industry

EH/EC

Horizontal, Multistage

EHS/K and ECB/S are non-self priming, horizontal multistage pumps, use in domestic water supply or portable application.
Its suitable for hot and cold liquids, even oily water that is clean and with no solid can be handled. Optional auto pressure switch can be fitted to enable pressure cut in/out to save energy and prolong the life of wear parts due to frequent start/stop, prolonging the motor life.

Single horizontal Pump design with Automatic Controller

EILM

Vertical In-Line, Surface Pumps

Vertically mounted, in-line suction and discharge design, allows the pump to be placed onto existing pipe line without major pipe work to boost pressure and saves space from its small foot print. Extra bearing can be added to meet heavy duty application and are optional.

EMS/V

High Pressure Horizontal/Vertical Multistage, Surface Pumps

EMS Series are vertically or Horizontally mounted multistage high pressure pump in segmented construction with opposing suction and discharge port of same nominal width or in-line-execution possible. It is capable of multi discharge construction upon request.

EMV

High Pressure, Horizontal/Vertical Multistage, Surface Pumps

EMV/S/K series are vertical multistage, Stainless Steel construction, inline pot position with flange designed according to DIN or ANSI 16.5B standard or Victalulic coupling. Standard pumps are fitted with motor according to IEC, with motor efficiency Class EF1; EF2 or NEMA frame upon request. All Pumps are fitted with cartridge type mechanical seal for easy chage out without removing motor and adapter or the pipes (EMV32 and above) and Laser Weld impeller for strength and material intagrity(EMV20 and Above)

ESC/V

Single Stage Double Suction,Horizontal Split / Mounting in Horizontal or Vertical Position, Surface Pump

Horizontal Split casing, Single stage, Double suction impeller with in-between bearing design, allows pumps run quietly and with minimal vibration. Coupled with dynamically balanced impeller the pumps life is greatly prolonged and therefore, increase MTBF (Mean Time Between Failure). This allows the pump to be mounted Horizontally and also, vertically to save spaces.

ESVS

Single Stage Double Suction,Vertical Split, Surface Pumps

ESVS ( C ) is Double Suction Vertical Split Case pumps. It’s Built according to the BB1 design – Between Bearing & foot mounted. Pump volute or casing shall be top suction and discharge as standard, optional with Suction and Discharge Ports in 90 Deg, upon request. These Design enable owner to save space and cost of construction as the foot print of the installed pump is 30-45% smaller compared to a standard Split casing pumps. With an integrally casted mounting feet and vertically split casing, it allows servicing of pump without disturbing the piping connections. The pump flanges are drilled to DIN EN 1092-2 or BS 4504 either ANSI class 125 or ANSI class 250. The impeller shall be bronze (stainless steel optional). The impeller shall be dynamically balanced. Testing of pumps can be carried out according to ISO 9906 Grade 2 and witness by the owner. ESVS(C) Pumps provide the ultimate in reliability and ease of installation for heating, air conditioning, pressure boosting, cooling water transfer, and water supply applications. It’s quiet, dependable and proven performance.

EU/EUX

Single Stage, End Suction Surface Pumps

General purpose Industrial Centrifugal pump. End Suction, Single Stage and Volute with Back Pull-Out (BPO) feature for ease of dismanteling. Dimensions and Performance built according to EN733/DIN24255 (VDMA 24278), EU and Germany machinary directive. 5 standards bearing frame and 3 extra strength bearing frame to reduce stocking.

MMC

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with cast iron body, ADC 12 motor casing, vortex impeller. Stainless steel shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

VT

Vertical In-Line Close Coupled Pumps

Vertical Multistage Turbine pumps are centrifugal pump built for partial or full immersion to draw water from below the ground surface, coupled with a surface motor or submersible motor. The key design are multi stage bowel assembly consisting of Bowel, Diffuser and mixed flow impeller design, Column pipe  and discharge head with motor stool to take hollow shafted NEMA or IEC motor.