Paper & Pulp

Product Finder Showing all 16 results
Select Product Type
Select Pump Category
Select Application
Select Industry

EJG

End Suction, Semi-Open Impeller, Surface Pumps

EJG series Open-impeller pulp pumps is based on new technology, the pump is successfully design based on long-term technology accumulation and on the experience of domestic and overseas advanced technology. The pump has a strong capacity to transport fibre, mud, the paper pulp below 5% consistency and other liquid with below 30% solid content. It can be used in those operating environments in the paper making, metallurgy, salt collecting, drainage and power plant, etc.The casing is end suction and radial discharge design. Its discharge centreline and shaft are in the same vertical plane. The casing is directly fixed on the base-plate. The front wear plate and back wear plate be designed for stripped down structure. We can replace worn part when the inter-spacer becomes large.

EJS/U/T

Self-Priming, Semi Open-Impeller,Surface Pumps

Self Priming, Single Stage, Semi Open Impeller centrigual pump suitable for dirty water or waste water with solid size limit to 75mm(3′) or pumping condition needing negative priming starts. This is possible with integrated casing and internal vents and check valve construction that allows water and air to seperated to achieve negative priming. Designed with grease lubricated bearing for min maintenance and oil lubricated for cooler bearing operation. Another great feature, enternal wear plate and impeller adjustment that allows uninterupted operation while maintaining maximum pump efficiency at all time.

EMS/V

High Pressure Horizontal/Vertical Multistage, Surface Pumps

EMS Series are vertically or Horizontally mounted multistage high pressure pump in segmented construction with opposing suction and discharge port of same nominal width or in-line-execution possible. It is capable of multi discharge construction upon request.

EMV

High Pressure, Horizontal/Vertical Multistage, Surface Pumps

EMV/S/K series are vertical multistage, Stainless Steel construction, inline pot position with flange designed according to DIN or ANSI 16.5B standard or Victalulic coupling. Standard pumps are fitted with motor according to IEC, with motor efficiency Class EF1; EF2 or NEMA frame upon request. All Pumps are fitted with cartridge type mechanical seal for easy chage out without removing motor and adapter or the pipes (EMV32 and above) and Laser Weld impeller for strength and material intagrity(EMV20 and Above)

ESC/V

Single Stage Double Suction,Horizontal Split / Mounting in Horizontal or Vertical Position, Surface Pump

Horizontal Split casing, Single stage, Double suction impeller with in-between bearing design, allows pumps run quietly and with minimal vibration. Coupled with dynamically balanced impeller the pumps life is greatly prolonged and therefore, increase MTBF (Mean Time Between Failure). This allows the pump to be mounted Horizontally and also, vertically to save spaces.

EST/ESP

Stainless Steel Bore Holes Submersible pumps

EST / ESP Bore hole pumps are used for submersible application where water are under the ground surface. The slim and light weight of the pump are ideal for well water and ground water extraction. They are constructed in multistage, closed impeller, diffuser with high chrome 304 stainless steel, a built-in check valve. Impellers are floating type and made of Nonyl for EST series and ESP series in SS304 or SS316. both series are fitted with NEMA type submersible motor. Bigger pumps are Laser weld to give it excellent strength and longevity.

GDE

Sewage/Drainage, Submersible Pumps

Submersible Grinder pump specifically designed for uses in narrow pit. Submersible with cast iron body, SS304 motor casing and vortex impeller. Stainless steel shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

HME

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with cast iron body, ADC 12 motor casing, vortex impeller. Stainless steel shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

SAE

Sewage/Drainage, Submersible Pumps

Submersible Agitator Sewage pump specifically designed for uses in narrow pit. Submersible with cast iron body, SS304 motor casing, vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

SCE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with SS316 body, & motor casing and vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel

SDE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with SS316 body, & motor casing and vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel

SVE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with cast iron body, motor casing and vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor  mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

SVNE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with SS316 body & motor casing and vortex impeller. Stainless steel shaft, double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

VT

Vertical In-Line Close Coupled Pumps

Vertical Multistage Turbine pumps are centrifugal pump built for partial or full immersion to draw water from below the ground surface, coupled with a surface motor or submersible motor. The key design are multi stage bowel assembly consisting of Bowel, Diffuser and mixed flow impeller design, Column pipe  and discharge head with motor stool to take hollow shafted NEMA or IEC motor.

XDE

Sewage/Drainage, Submersible Pumps

Submersible drainage pump specifically designed for uses in narrow pit. Submersible with Stainless steel 304 body & motor casing, open  impeller, Stainless steel 304 shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

XVE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with Stainless steel 304 body & motor casing, vortex impeller, Stainless steel 304 shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor  mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.