Spraying System

Product Finder Showing all 19 results
Select Product Type
Select Pump Category
Select Application
Select Industry

EA

Single Stage, End Suction, Monobloc, Surface Pumps

EA series of pump is single-stage centrifugal pump and features axial suction and radial discharge. Compact structure , the pump is connected with the motor, co axial installation., screw thread inlet and outlet. Light weight, thin plate pressing structure for main parts and components. Use for Pressurisation and pumping of industrial and civilian clean water or other liquid.

EB

Horizontal, Single Stage, End Suction Monobloc, Surface Pumps

EB/EB2 series is a single/twin impellers close-coupled stainless steel centrifugal pumps. They are ideal where space is a premium and a need for ease of alignments between pump and motor. Main dimensions and performance according to ISO2548C standard. It is available in two versions, SUS 304 and SUS 316L and are suitable for transferring moderately aggressive fluid.

EH/EC

Horizontal, Multistage

EHS/K and ECB/S are non-self priming, horizontal multistage pumps, use in domestic water supply or portable application.
Its suitable for hot and cold liquids, even oily water that is clean and with no solid can be handled. Optional auto pressure switch can be fitted to enable pressure cut in/out to save energy and prolong the life of wear parts due to frequent start/stop, prolonging the motor life.

EIC/EM/EWH/EW

Inverter Constant Pressure, Surface Pumps

EIC is a compact booster pump for water supply and boosting in household and light commercial application. The integrated variable speed inverter enables the pump to maintain contact pressure in the piping system. The use of stainless steel & composite material makes the pump light and is ideal for drinking water application.

EJS/U/T

Self-Priming, Semi Open-Impeller,Surface Pumps

Self Priming, Single Stage, Semi Open Impeller centrigual pump suitable for dirty water or waste water with solid size limit to 75mm(3′) or pumping condition needing negative priming starts. This is possible with integrated casing and internal vents and check valve construction that allows water and air to seperated to achieve negative priming. Designed with grease lubricated bearing for min maintenance and oil lubricated for cooler bearing operation. Another great feature, enternal wear plate and impeller adjustment that allows uninterupted operation while maintaining maximum pump efficiency at all time.

EK

Horizontal, Single Stage, End Suction, Monobloc, Surface Pumps

The Euroflo EK series are non-self-priming centrifugal pumps with semi-open impeller. The pump wetted parts are of stainless steel (SUS 304 or SUS 316 ) construction and are particularly suitable for transfer of liquid with suspended solid size up to 14mm ( spherical ). The closed coupled / Back Pull Out design saved space and ensures flexibility of installation without moving the pump body from the piping system.

ES/ED

End Suction Centrifugal Pumps

ES/ED series is a single stage Back Pull-Out ( BPO ) Stainless Steel Centrifugal pumps. They are ideal where space is a premium and a need for ease of alignments between pump and motor. Main dimensions and performance according to EN733/DIN24255 standard. It is available in two versions, SUS 304 and SUS 316L and are suitable for transferring moderately aggressive fluid.

EST/ESP

Stainless Steel Bore Holes Submersible pumps

EST / ESP Bore hole pumps are used for submersible application where water are under the ground surface. The slim and light weight of the pump are ideal for well water and ground water extraction. They are constructed in multistage, closed impeller, diffuser with high chrome 304 stainless steel, a built-in check valve. Impellers are floating type and made of Nonyl for EST series and ESP series in SS304 or SS316. both series are fitted with NEMA type submersible motor. Bigger pumps are Laser weld to give it excellent strength and longevity.

EU/EUX

Single Stage, End Suction Surface Pumps

General purpose Industrial Centrifugal pump. End Suction, Single Stage and Volute with Back Pull-Out (BPO) feature for ease of dismanteling. Dimensions and Performance built according to EN733/DIN24255 (VDMA 24278), EU and Germany machinary directive. 5 standards bearing frame and 3 extra strength bearing frame to reduce stocking.

EUM

Single Stage, End Suction Monobloc, Surface Pumps

General Purpose pumps used for Building & services, where space is a premium and a need for ease of alignments between pump and motor. This series of pump allow user to have a compacted foot print and consistences base dimension for OEM manufacturer.Optional extra bearing for heavy duty to resist impeller vibration.

GDE

Sewage/Drainage, Submersible Pumps

Submersible Grinder pump specifically designed for uses in narrow pit. Submersible with cast iron body, SS304 motor casing and vortex impeller. Stainless steel shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

HME

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with cast iron body, ADC 12 motor casing, vortex impeller. Stainless steel shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

SAE

Sewage/Drainage, Submersible Pumps

Submersible Agitator Sewage pump specifically designed for uses in narrow pit. Submersible with cast iron body, SS304 motor casing, vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

SCE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with SS316 body, & motor casing and vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel

SDE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with SS316 body, & motor casing and vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel

SVE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with cast iron body, motor casing and vortex impeller. Stainless steel shaft , double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor  mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

SVNE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with SS316 body & motor casing and vortex impeller. Stainless steel shaft, double mech seal & one oil seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

XDE

Sewage/Drainage, Submersible Pumps

Submersible drainage pump specifically designed for uses in narrow pit. Submersible with Stainless steel 304 body & motor casing, open  impeller, Stainless steel 304 shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.

XVE

Sewage/Drainage, Submersible Pumps

Submersible Vortex Sewage pump specifically designed for uses in narrow pit. Submersible with Stainless steel 304 body & motor casing, vortex impeller, Stainless steel 304 shaft , double mech seal. Continuous duty submersible induction motor, in a watertight casing . Rotor  mounted on double-shielded ball bearing. Thermal protection in the winding, to be connected to the panel.